Zhangjiagang U Tech Machine Co., Ltd
Specialized In Blow Molding Machine And Auxiliaries
Add to Cart
PE Chemical 5L Plastic Barrels Blowing Extrusion Blow Molding Machine
Introduction
PE chemical plastic barrels blow moulding machine
The automatic blow molding machines can be used for A wide variety of materials,which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
5l plastic pe extrusion blow moulding machine
Feature
Die head: Special steel and centre feed extrusion die head;
Extruder unit: adopt automatic temperature control unit of import,the screw united by frequency motor,hard tooth surface gear box to achieve stepless speed regulation;
Clampling device: Across the basement type double linear guide and move mould strengthen
rigidity. Template is three bar with center clamping system
Hydraulic system: whole system adopt imported components, proportional control flow, Fast
response, more stable, power consumption without loss;
Electric controlling system: it adopts Japan programmable controller, touch screen,the
characteristic of it has direct manipulation and large information on board.
Parameter
Max Product Volume | 5 L |
Target Material | LDPE/HDPE/PP/PVC/PETG |
Machine Size | 3.8x2.2x2.4 m |
Machine Weight | 5.5 Tons |
Voltage Suitable | Customer Specified |
Screw Diameter | 70 mm |
L/D Ratio | 24:1 |
Barrel Heating Power | 14.2 KW |
Extrusion Motor Power | 22 KW |
Plasticizing Capacity | 90 KG |
Platen Size | 320x390 mm |
Opening Stroke | 150~500 mm |
Max Mould Size | 350x390 mm |
Head No. | 1 |
Central Distance | 160 mm |
Heating Zone No. | 2+1 |
Head Heating Power | 5.7 KW |
Total Power | 52 KW |
Average Energy Consumption | 31.5 KW |
Compressed Air Needed | 0.6 Mpa / 1.0 m3 |
Cooling Water Needed | 4.5 m3/H |
Loading Reference | 20’GP |