
Add to Cart
Automatic 25L Euro Type Stackable Jerry Can Making HDPE Blow Moulding Machine
Introduction
This machine adopts imported hydraulic control system, more steady and long-time used,furthermore, it adopts the international most advanced parison control system to ensure the evenness and accuracy of products wall thickness.
1. The screw design of high-performance mixing to ensure uniform plasticized, for the production of a variety of plastics.
2. The extruder adopts frequency conversion motor drive, the machine energy consumption.
3. provide a single-mode or dual rack shelf models to meet different capacity requirements.
4. mold for horizontal movement moving way, by linear slide operation Parallel shift mode, shift mode quickly and high stability.
5. clamping cylinder in the middle position the template so that even by force, improve product quality, extend die life cycle.
6. opening and closing of the mold by three column-control, increase the clamping force, providing high stability of the machine operation and high efficiency.
7. Extrusion die institutions rise device so fast cutting, to avoid sticking mold.
8. shunt shuttle extrusion die or screw into the material, parison wall thickness, color change quickly and conveniently.
9. All die Optional parison wall thickness control system to optimize the thickness of products, saving raw materials.
10. fuel system professionally designed, fast, slow down smoothly without impact, low noise and energy saving.
11. The machine can be optional automatic cutting mechanism, robotic pick-operation with the finished product conveyor belts to meet fully automated production.
12. Models are also available with membrane labeling machine, to meet the special requirements of products production.
SPECIFICATIONS & TECHNICAL DATA | |||
Extrusion Unit | Screw Diameter | mm | 80 |
Plasticizing Capacity | Kg/hour | 100 | |
Temperature Control Zone | No. | 5 | |
Accumulating Head | Accumulating Head Volume | L | 3.5 |
Max Ejection Weight | KG | 2.65 | |
Max Product Net Weight | KG | 1.8 | |
Max Die Diameter | mm | 350 | |
Clamping Unit | Clamping Force | KN | 260 |
Platen Size | mm | 750x800 | |
Opening Distance | mm | 400~950 | |
Max Mould Thickness | mm | 550 | |
Max Mould Size | mm | 600x900 | |
Driving System | Extrusion Motor Power | KW | 30 |
Pump Motor Power | KW | 18.5 | |
Machine Total Power | KW | 88.5 | |
Average Power Consumption | KW | 27 |
Components list
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|